LDI G615-06-A-1 Liquid Level Gage, 6″ Mounting Centers Aluminium Body

Brand: LDI Industries

Model Number: G615-06-A-1

Series G615, 6″ (152.40 mm) mounting centers Aluminum gage body Buna N Seals

Size: A: 6″ (152.40mm) B: 4.5″ (114.30mm) C: 7.62″ (193.55mm)

Weight: 2 lbs

SKU: TILG6A1L Category:

Description

Series G615, 6″ (152.40 mm) mounting centers Aluminum gage body Buna N Seals

G615 SERIES:

The G615 Series front mount closed-circuit sight gages provide front viewing of the fluid level clearly delineated by a red line on white background integral to the glass sight all secured within an aluminum body. HIGH-LOW markings are stamped into the aluminum body and a wetted dial thermometer provides a direct reading of the fluid temperature.

Standard Features:

♦ Front mount
♦ Fluid level visible from the front of gage (.50 inches wide)
♦ Viewing enhanced by redline on white background integral to the sight glass
♦ 1.38” diameter dual scale dial thermometer, 50° to 300°F and 10° to 150°C
♦ Suitable for use with most hydraulic and machine lubricating oils

Standard Materials:

♦ Aluminum gage body and mounting bolts
♦ Buna N seals
♦ Borosilicate glass sight
♦ Zinc-plated, steel hex nuts

Temperature and Pressure Ratings:

♦ Please refer to Appendix RA-1 on page RA-A1 for Sight Opening & Pressure Rating information
♦ Please refer to Temperature Ratings by Seal Material for additional operating conditions (Appendix RA-5 on page RA-A5)

NOTE:
♦ Please refer to Appendix RA-2 on page RA-A2 for installation instructions

CAUTION:

♦ Not recommended for use with water, steam, acidic fluids, caustic fluids, and volatile fluids
♦ If aluminum construction is selected for a water application, anodizing is recommended
♦ The reservoir must be drained to remove dial thermometer or loss of fluid will occur

Reviews

There are no reviews yet.

Be the first to review “LDI G615-06-A-1 Liquid Level Gage, 6″ Mounting Centers Aluminium Body”

Your email address will not be published.